2. Required Technician ( Industrial Level )
for PCB card repairing,
VFD repairing, Control Cards Repairing.
Company : Novel Overseas Corporation
Country : Qatar
Description : •Excellent Tendering Experience with D365 CRM/ERP projects
•Certified in D365 CRM/ERP technologies and implementations (Preferred)
•Experience in writing RFP for ERP/CRM projects on both business and technical basis.
•Extensive awareness of D365 features
•Extensive experience in liaising with business stakeholders and converting business needs into RFP and mapping needs to D365 features
•Awareness of D365 best practices and design principles
•Experience in Business Analysis and Process Mapping Experience with Process Improvement/Management.
•Excellent tendering documentation experience
Company : People Dynamics
Country : Qatar
Description : LEAD OPERATOR (Doha)
• 5-7 years supervisory experience
• Working knowledge of diverse high-speed machinery and measurement tools (caliper, micrometer etc.)
• Experience in using various types of manufacturing machinery and tools.
• Working experience with technical drawings
• Computer knowledge with basic understanding of machine settings by computer
• Arabic Language is a Preferable
• High school, Diploma or equivalent; technical degree is a plus
MACHINEXX INC-----
Main Roles and Responsiblities
Implement or supervise the installation, commissioning and operation of the electrical/optical equipment.
Programming and repair of automated equipment (PLC) and operators interface (HMI) of different manufacturer (Omron, Schneider, Allenn-Bradley, and Siemens)
Assist in the inspection, commissioning, adjustment, and evaluation of the electrical components, electromechanical, and electronic assemblies to ensure their conformity with standards and tolerances.
Knowledge about operation, configuration, and troubleshooting of different frequency drives, soft starters, and other power components.
Perform preventative maintenance and emergency repair on our customers systems
Writing service reports, warranty reports, and other relevant documents concerning our equipment and customers.
Requirements
Training in technical electrical (Professional studies, Technical College or Engineering studies.
Three to five years experience in the domain of automation and control
Mechanically inclined
Able to read engineering drawings
Knowledge of optical systems an asset
Capacity to perform troubleshooting over the phone
Availability for frequent travel to our customers facilities
Job Types: Full-time, Permanent
Experience:
Automation and Control: 3 years (Required
Company : Arabian Infotech Training Institute
Country : Qatar
Description : HVAC DESIGN - MEP TRAINING
This advanced training introduces those with experience in mechanical engineering to HVAC design.
Upon the completion of the program, participant are skilled in the following areas:
Heat Load Calculation (Manual, E20 & HAP Software)
Ventilation Criteria (Car Park & Kitchen etc..)
Classification and selection of air handlers
Duct system design (Manual & Software Duct Sizer)
Different Types of Ducting
ESP Calculation
Chilled water piping design
Chiller Plant Working
Analysis of Chiller Problems
District Cooling System Design
Sizing of Stairwell Pressurization Fan
Types of building Systems
VAV & VRV Chiller and their important in Selection Procedure
Criteria for Equipment selection (Review with ACTUAL EXAMPLES) like
Pump, Air handling unit, Fan coil unit
Chiller, Fan, Car Park Ventilation, Cooling Tower
Control valve (2 port & 3 Port) and balancing valve selection etc....
Practical Project with Govt. Standards
Using ASHRAE Standards.
Course Description
Explore the fundamentals of HVAC design. Topics include cooling load calculation, including building envelops, U-value, internal and external heat gains, and ventilation criteria; psychometric; air handling system and their components, selection criteria, and classification; Duct system design, including pressure loss calculation; fan classification and selection; and relevant laws.
Focus on types of building systems, including constant and variable volume; vapour compression refrigeration cycle; centrifugal and absorption chillers; heat rejection option, including cooling towers, air cooled condensers; pipe sizing for hydronic systems; centrifugal pumps including selection criteria and pump laws.
Description : Supervises a team of technicians (various trades) and machinists in a gas plant workshop & in the outside field(plants). Familiar with all machine tools in a workshop, repair of rotating machinery components, heat exchangers repairs and re-tubing, valves reconditioning & refurbishment. Knowledgeable & skilled in balancing, welding, painting, tinsmith and civil crafts. A. Knowledge: Education: - Completion of secondary education(12 years) plus 2 years full time training in the mechanical discipline leading to possession of a recognized diploma. Experience: - Has working knowledge and maintenance experience(minimum 10 years) in the installation, maintenance and repairs of mechanical equipment in the maintenance department of gas plant, refinery or petrochemical plant. -Has a minimum of 15 to 20 years work experience in a workshop environment with hands on experience on all types of machinery. -Eight(8) years experience in a gas plat, refinery or petrochemical machine shop. -Minimum five(5) years experience in a supevisory position. B. Skills: -Computer Literate and use of a computerized maintenance management system(CMMS) -Fluent in english (Written, spoken) Competencies: -Ability to work under pressure day or night.
JEDI Middle East
Category : Engineering
Description : We are is still hiring TAB ENGINEER Qualification: 1. Fresh graduate is welcome 2. HVAC background is an advantage 3. Mechanical Engineer background is also an advantage 5. Preferably has visa and ID 4. Can commence to join immediately 5. Preferably base in Qatar and Kuwait. Note: 1. Interested applicant may send your updated CV
Description : Qatar Local Hiring ONLY
BIM Manager/Leader
Responsibilities
• Definition of technical and quality standards and tools for production and coordination of information models
• Preparation or support to prepare technical reports at project level, relevant to his field of play (discipline/trade)
• Development, maintenance and enforcement of Project BIM Requirements, by liaising with all stakeholders from Clients and its representatives
• Lead, maintain and coordinate with the company Project controls all required information tasks and activities for Contract, Project and Risk Management in accordance with company's standards
• Analysis and Review of technical information
• Review, Audit and Quality Check of Information models
• Task assignment and monitoring for the subordinates (production/project) team
Supervisory / Leadership / Managerial Tasks:
• Be an inspiration leader by strong principles and commitment to the organization based on organization, resilience and agility.
• Sponsor and disseminate an R&D and innovation culture across the department, defining a climate for overall success.
• Identify and establish new opportunities for BIM/Projects execution, in alignment with Line Managers and following company’s strategy
• Lead, maintain and monitor the task management systems for his subordinates, in collaboration with Project Controls
Requirements
Education: BSc, Project Management
Experience:
7+ Years
Description : Urgent Requirement For Marine Technician in Qatar(Apply Immediately)
Local Candidates only with transferable RP, experienced with Boats or Luxury Yachts, Experienced with Boat Navigation systems.
We prefer someone who can join immediately,
Must have 2 years of experience in Boats & Yachts.
Nationality: Any
Local Candidate, With NOC & QID
Must have transfer of sponsorship.
Best Salary & Accommodation And Transportation Company Provided
Recruitment Opportunity with Management Solutions International (MSI). Our client in Qatar is looking to hire ELV/LV Technician
Minimum Requirements:
• Candidate should be available locally in Qatar.
• Manlift Experience is required.
• Candidate Should have Driving License
Company : Mohajl Group
Country : Qatar
Description : Production Manager
We are hiring for the position of PRODUCTION MANAGER in our factory in Mesaieed.
Qualifications:
>Able to work under pressure.
>Transferable Residency permit with NOC.
Salary will be discussed during the interview..
Interested applicants may send updated resume
united-gulf
Country : Qatar
Description : A private company in Doha is looking for the following positions:-
1. OPERATIONS COORDINATOR
- with 2 to 3 years relevant experience in Heavy machinery industry.
- Graduate degree in similat field.
2. SPARE PARTS COORDINATOR
- with 2 to 3 years experience working in Stores.
- knowledge in handling spare parts for Heavy machineries like Aerial work platforms, Cranes, etc.
- knowledge/ experience in ERP, inventory control, documentation and supply chain.
- Graduate is mandatory.
As the Operations Manager you will be in charge of the day-to-day operations of the program by coordinating and supporting all operations variables in the delivery of the accelerator, driving engagement between the startups and the partners, and by continuing to build and strengthen the program’s position in the market. The Operations Manager overviews and supports in delivering, coordinating, and actively participates in: - Managing the operations of the program - Running the accelerator on a D2D business, including startup communications and creating a clear plan of delivery - Coordinating the recruitment for startups - Driving applications during the recruitment period - Coordinating relevant events, including Mentor days Angel bootcamps, FastTrack days, Selection days, Demo days - Assisting the Program Director in relation to investors and sponsors - Attracting and managing mentors - Preparing relevant reports (program reports, portfolio reports, etc) - Prepare expense reports for the team - Drive invoicing process and company registration related business - Managing the Entrepreneur in residence and the interns We’re looking for someone who ticks as many of the following boxes as possible: - You are organized, action and service-oriented; you are a self starter with focus on execution and speed - You have developed networking and communication skills - You have excellent business development skills and a high degree of commercial understanding and cultural sensitivity - You are a great match with our strong and value driven culture (see below) - You have 4-6 years of experience working with startups, growth companies and/or in the corporate world. Preferably a mix of both startup and corporate experience - You are an experienced program leader and have managed complex projects - You have experience running programs such as accelerators, corporate incubators, innovation programs or startup challenges - You have experience as a founder or early employee - You've interacted with founders, investors and with corporate executives What we offer: - A unique culture focusing on three strong values: being entrepreneurial, being impactful and being kind. Read our culture book herehttps://rainmaking.io/RM_culturebook.pdf - A great working environment and awesome colleagues - A fun and challenging role with lots of room to influence how things get done - An opportunity to work with some of the world’s best startups transforming the industry
Greetings From Swan Global
We have an immediate opening for HVAC Supervisor position!!!!
Should have 2-3 Yrs of in Supervising and maintenance experience.
Salary QR 4000(Full).
Must have QID . Any nationality.
Country : QATAR
Description : Greetings From SWAN Global...
we have an opening for HVAC Technician in Doha Location.
Required:
Should have experience in HVAC Technician(in facility management) .
3000 QAR+FAT, with valid QID.
Interested one can share the resume
Company : AHG
Country : Qatar
Description : ****IMMEDIATE HIRING****
FABRICATION MANAGER
Location: Al Khor
Minimum of 8 years experience in Structural and Steel Fabrication in GCC.
Should be able to manage the division independently.
Qualification: Engineering graduate with computer skills
With Transferable Visa and valid Qatar Driving License
Company : United Gulf Access
Country : Qatar
Description : HYDRAULIC MECHANIC
•Required to possess 4+ years’ experience as a mechanic with experience in access platforms (boomlift, scrissorlift, manlift, etc) or other heavy equipment
•Able to repair hydraulic systems & components independently.
•Should know how to troubleshoot read and understand hydraulic schematic diagram.
•Can independently overhaul / trouble shoot engines.
•Minimum Qualifications - Std 10th + ITI or equivalent certification.
•Salary: QAR 3,500.00 – QAR 4,500.00 per month
Company : Energy Electric Controls
Country : Qatar
Description : Must be at least minimum of 3 year(s) of experiences in Construction Industry mainly task is on Building Management System expert on SCHNEIDER ELECTRIC automation and devices.
Must be highly knowledgeable using SCHNEIDER STRUXUREWARE SBO software for 3 year(s) or more.
Must be a good team leader and player.
Can handle issues with minimum supervision.
Good character.
Other qualifications will be ask on interview.
Expect Actual programming of system on interview.
Responsible for operating the HVAC & Refrigeration plants and daily logging of all operating conditions.
• To perform periodical, preventive and breakdown maintenance of large HVAC and refrigeration plants.
• Knowledge in large seawater cooled chillers, trouble shooting on electrical and electronic controls of air-conditioning systems are desired.
• Responsible for all site coordination with company personnel
• Requesting and closing the work permit and to carry out the permitted jobs in line with the HSE requirements
• Coordinate with company warehouse for issue of materials.
• Ensure that all activities related to his discipline are performed safely and efficiently in line with company objectives.
DevOps Engineer for our Bahrain operations with the following skillsets & terms and conditions:
Responsibilities
• Work closely with members of the development, tests, and operations teams to troubleshoot build breaks, enforcement of software quality standards, and proper communication of the package’s installation steps to operations for both non-production and production environments.
• Continue development and maintenance of the automated software build process;
• Work closely with each product family to develop new DevSecOps features and capabilities;
• Assist with creating project resource estimates, metrics to track completion phase, defect reports, defect prevention, development efficiency and quality;
• Contribute to an atmosphere of cross-functional teamwork within the organization’s agile project lifecycle
• Develop and improve operational practices and procedures.
Requirements
Education / Certifications
College degree (B.S.) in Computer Science, Software Engineering, Information Management Systems or a related discipline
Knowledge & Experience
Qatar Airways
Welcome to a world where ambitions fly high
From experienced pilots to dynamic professionals embarking on new careers, Qatar Airways is searching for talented individuals to join our award-winning team.
We take pride in our people—a dynamic and culturally diverse workforce is essential to why we are one of the finest and fastest growing airlines in the world.
We offer competitive compensation and benefit packages.
About your job:
As a member of the Aircraft Deliveries & Supplier Quality Team, you are expected to oversee the build and quality assembly,including the delivery process of new required IFE system as per scope of company granted Authorizations a member of the Aircraft Deliveries & Supplier Quality Team. Establish partnerships with key suppliers to ensure the product is within the specification ensuring that all related deficiencies are noted and properly documented and corrected. Those deficiencies that cannot be corrected are imbedded in the associated commitment letter for improvement investigation and resolution as agreed while achieving cost containment.
Key Accountabilities include:
Operational
To supervise a team of technical assistants which would be responsible for the final release of IFE products by the Supplier Quality Engineer - Level I (IFE).
Perform all new supplier products' Source Inspections (SI) related to In-Flight Entertainment systems prior delivery to Qatar Airways or designated MRO's to make sure the products is as per the specification and free of any quality manufacturing defects.
Initiate action to prevent the occurrence of any non-conformities relating to product quality and verify the implementation of the solution.
Work with Vendor & Contract performance section to monitor the supplier KPl's and to ensure supplier performance is regularly reported and that appropriate and timely corrective actions are implemented.
Participate in the establishment of In-Flight Entertainment system supplier performance metrics.
Identify program related issues of In-Flight Entertainment and cabin systems' and liaise technical concerns to respective Qatar Airways department in order to place a solution on a timely manner
All manufacturer's published technical documents relating to open supplier concerns are reviewed and validated during factory inspection of supplier product ensuring items that affect the fleet operation are highlighted to responsible Aircraft Deliveries section for contractual resolution
Company : Alba Generators WLL
Country : Qatar
Description : We are looking for:
1 Mechanic
1 Electrician
Who can join us immediately (Urgent Hire)
One (1) Year Experience of Diesel Generators
Salary to be discussed during Interview
Company : Venture Gulf Engineering
Country : QATAR DOHA
Description : Structural Fabricators
Riggers - 3rd party certified
NDT Technicians
Electricians - Industrial
Electrician cum AC Technicians
Diesel Forklift Operators - Licensed
Heavy/Trailer Drivers - Licensed
General Workers
Certified 6G Welders, TIG+ARC
Certified Steel Fabricators
Working with CNC Milling machinery from 3axis to 5axis
QUALIFICATIONS
• Mold tooling design and Core a cavity design by CATIA software
• Sketch design and Part design by CATIA
• Generative shape design and Assembly design by CATIA
• Drafting by CATIA
• Prismatic machining and Surface machining by CATIA
• Lathe machining by CATIA
• Working with Turning and Milling machinery on manual
• Working with CNC Turning and Milling machinery as an operator
• Servicing and maintenance of CNC machinery on manual
• Working with variety of pillar and radial drills
• 3D models design and 2D industrial Cartography by CATIA
[۷/۵،†۱۸:۳۸] Omid Reza: • Production process design to produce industrial components by CNC
Turning Milling on manual
• Being familiar and working with CNC controls
• Being able to get G-code to produce industrial components by CNC
machinery
• Operational and practical familiarity in using measurement tools such as
variety of Calipers, depth gauge, inside and face micrometers and
diameter testers
• Being familiar with Siemens, Fanuk, Heiden Hain and Engelhard
controls.
• Being familiar with some software such as Solid Works, Power Mill and
Master Cam and the ability to use them in building and designing
industrial components
• Designing mechanical parts of Electron Beam Welding and building
components of the project
• Programming CNC Turning-milling by CATIA
CURRENT OCCUPATION
• Producing industrial components related to Petrochemicals, Oil,
Automobile Manufacturing industries in my own private workshop
• Designing and building industrial components wither in isolation or by
assembly
RELATED EXPERIENCES
2005-current
• Learning to work with CATIA software
• Learning to program CNC machinery, an advanced technology, after
their emergence in private sector in Iran
• Teaching design and modeling 3D and industrial cartography by
CATIA
• Working with the learned controls
• Designing and building hydraulic increasing and decreasing valves
from 30 bar to 690 bar and vice versa
• Conducting researches on industrial issues
[۷/۵،†۱۸:۴۰] Omid Reza: • Reverse Engineering and producing hydraulic regulators having 30-
690 bar pressure and hydraulic manual pumps up to 700 bar (for which
maps and 3D models will be sent as an appendix to this CV)
• Applying such materials as Stainless Steel-316, Steel-304, Steel-310
and Steel-321 and 1.2344, 1.2312, VCN200 and VCN150 Steels and
Umithite and a variety of Aluminum Grades, including 2000, 6000 and
7000 groups in building components
Instrument Technician with testing and commissioning experience. Requirements QID with NOC / Working visa with NOC Able to join immediately
Company : Venture Gulf Engineering
Country : QATAR DOHA
Description : ELECTRICAL ROTATING MACHINERY REPAIR SHOP JD FOR SUPERVISOR
Position : Workshop supervisor
Department : ERMRS
Job duration : 2 years extendable
No. of vacancies : 1
Job Summary
Knowledge about A/C & D/C motor and generator rewinding and repair. co-ordinate and
prioritize all the works performed in the shop department and ensure that every repair stage
meet the standards and satisfy client’s requirement.
Job Responsibilities
 To schedule and prioritize all works to be performed by the respective sections.
 To monitor, initiate and implement the use of documentation for each respective process in
every section.
 To analyze and investigate quality control problems and customer complaints.
 To study and recommend solutions for quality improvements to achieve the quality
objectives.
 To develop, improve and maintain the documentation of every job.
 To assist the technicians in analyzing defects and inspection of each components prior to
finalize the recommended scope of work.
 To assist technician in decision pertaining to dismantling, assembling and testing of electromechanical equipment.
 To review and ensure that all pertinent data’s and sketch written on the data sheets are
correct, legible and understandable with the other personnel.
 To conduct testing, inspection and analysis of raw materials, components and repaired
equipment to ensure of its quality, performance and correctness.
 To review and make a summary list of needed parts for each job orders and raise purchase
request to stores.
 To review, inspect and check the purchased materials or components for its correctness,
quality and suitability.
 To confer to the workshop manager for any discrepancy or non-conforming products found
Page 2 of 2
during the repair or testing process.
 To ensure that all finished works meets our standard quality criteria, client’s requirement
and all paper works are complete.
 To comply with all company memos and if required distribute appropriately to shop
personnel.
 To assist / supervised employees understand and observe company rules and regulations
including proper safety procedures.
 To perform other skilled or non-skilled duties as directed by the workshop manager.
 To observe all safety procedures and use of proper protective gears.
Remuneration package : QAR 4000 – 5000 Basic Salary
Employee benefits : 21 days annual leave with leave salary
Joining passage from home town to Doha
Yearly passage from Doha-home town-Doha
Single status bachelor staff accommodation
Food allowance of QAR 300 per month
Company : Mace macro international limited Qatar
Country : Qatar
Description : fire alarm system&Vesda System installed & maintenance inspection, testing. fire fighting system maintenance Inspection testing quarterly annually & fire extinguisher maintenance fm200 system maintenance. inspection, testing. hospitality & project's
ORYX Engineering-------
DUTIES AND RESPONSIBILITIES
Assist in the planning, organisation and implementation of a planned preventative maintenance programme.
Inspection, installation, levelling and alignment of all new plant and equipment.
Perform unscheduled, preventative and predictive maintenance on complex equipment and systems.
Trouble shoot, maintain, repair or replace pneumatic, hydraulic, electrical and mechanical equipment.
Trouble shoot, maintain, repair or replace inverters, spindle drives, drive motors, clutches and bearings.
Trouble shoot, maintain and repair CNC controls, and PLC Systems.
Reassemble and test in accordance with all approved OEM / OES work and test procedures.
Ensure that all work activities are carried out in an efficient, professional and tidy manner.
Regular progress updates and report any new findings or issues that may impact on completion date.
Maintain a high standard of personnel / workshop / equipment / machines and tooling cleanliness.
Accurately record repairs, time, parts and materials in the computerised maintenance management system.
Comply with all company QHSE policies, practices and procedures.
Contribute to the team ethic and perform other reasonable duties as required in support of the business.
Maybe required to work off site in support of business activities.
SKILLS AND QUALIFICATIONS
Time served in a electrical/mechanical engineering discipline ideally with forklift certification. Must have a minimum of 4 years experience in electrical, mechanical, hydraulic and pneumatic systems root cause analysis diagnostics and repair, tool testing, PLC trouble shooting, programming, variable speed spindle/servo drives and other plant and equipment.
Carrier
Order Intake: Work towards achieving the assigned order intake target in the respective categories of Service Agreements, Service Repairs and Service Modernisation, while complying with company Finance, Ethics and Sales Policies. Sales: Work towards achieving the assigned sales target in the respective categories of Service Agreements, Service Repairs and Service Modernisation, with aggressive internal and external customer follow-up. Gross Margin: Work towards achieving the assigned Gross Margin target in the respective categories of Service Agreements, Service Repairs and Service Modernisation by extensive customer negotiation and winning projects at the right price. Receivables: Be personally responsible for the pending receivables from customer and ensure that all outstanding balances are cleared in timely manner. Qualifications: • Bachelor’s degree in mechanical engineering or equivalent. • 3-5 years of experience in HVAC service sales. • Knowledge of HVAC industry in Qatar • Qatar Driving license • Good command of written and spoken English, Arabic is a plus. What do we offer? • Benefit from our great workplace environment and culture • Participate in incentive plans • Get development and learning opportunities • Get competitive salary and benefits, suitable to your seniority level Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
2. Required Technician ( Industrial Level )
for PCB card repairing,
VFD repairing, Control Cards Repairing.
Company : Novel Overseas Corporation
Country : Qatar
Description : •Excellent Tendering Experience with D365 CRM/ERP projects
•Certified in D365 CRM/ERP technologies and implementations (Preferred)
•Experience in writing RFP for ERP/CRM projects on both business and technical basis.
•Extensive awareness of D365 features
•Extensive experience in liaising with business stakeholders and converting business needs into RFP and mapping needs to D365 features
•Awareness of D365 best practices and design principles
•Experience in Business Analysis and Process Mapping Experience with Process Improvement/Management.
•Excellent tendering documentation experience
Company : People Dynamics
Country : Qatar
Description : LEAD OPERATOR (Doha)
• 5-7 years supervisory experience
• Working knowledge of diverse high-speed machinery and measurement tools (caliper, micrometer etc.)
• Experience in using various types of manufacturing machinery and tools.
• Working experience with technical drawings
• Computer knowledge with basic understanding of machine settings by computer
• Arabic Language is a Preferable
• High school, Diploma or equivalent; technical degree is a plus
MACHINEXX INC-----
Main Roles and Responsiblities
Implement or supervise the installation, commissioning and operation of the electrical/optical equipment.
Programming and repair of automated equipment (PLC) and operators interface (HMI) of different manufacturer (Omron, Schneider, Allenn-Bradley, and Siemens)
Assist in the inspection, commissioning, adjustment, and evaluation of the electrical components, electromechanical, and electronic assemblies to ensure their conformity with standards and tolerances.
Knowledge about operation, configuration, and troubleshooting of different frequency drives, soft starters, and other power components.
Perform preventative maintenance and emergency repair on our customers systems
Writing service reports, warranty reports, and other relevant documents concerning our equipment and customers.
Requirements
Training in technical electrical (Professional studies, Technical College or Engineering studies.
Three to five years experience in the domain of automation and control
Mechanically inclined
Able to read engineering drawings
Knowledge of optical systems an asset
Capacity to perform troubleshooting over the phone
Availability for frequent travel to our customers facilities
Job Types: Full-time, Permanent
Experience:
Automation and Control: 3 years (Required
Company : Arabian Infotech Training Institute
Country : Qatar
Description : HVAC DESIGN - MEP TRAINING
This advanced training introduces those with experience in mechanical engineering to HVAC design.
Upon the completion of the program, participant are skilled in the following areas:
Heat Load Calculation (Manual, E20 & HAP Software)
Ventilation Criteria (Car Park & Kitchen etc..)
Classification and selection of air handlers
Duct system design (Manual & Software Duct Sizer)
Different Types of Ducting
ESP Calculation
Chilled water piping design
Chiller Plant Working
Analysis of Chiller Problems
District Cooling System Design
Sizing of Stairwell Pressurization Fan
Types of building Systems
VAV & VRV Chiller and their important in Selection Procedure
Criteria for Equipment selection (Review with ACTUAL EXAMPLES) like
Pump, Air handling unit, Fan coil unit
Chiller, Fan, Car Park Ventilation, Cooling Tower
Control valve (2 port & 3 Port) and balancing valve selection etc....
Practical Project with Govt. Standards
Using ASHRAE Standards.
Course Description
Explore the fundamentals of HVAC design. Topics include cooling load calculation, including building envelops, U-value, internal and external heat gains, and ventilation criteria; psychometric; air handling system and their components, selection criteria, and classification; Duct system design, including pressure loss calculation; fan classification and selection; and relevant laws.
Focus on types of building systems, including constant and variable volume; vapour compression refrigeration cycle; centrifugal and absorption chillers; heat rejection option, including cooling towers, air cooled condensers; pipe sizing for hydronic systems; centrifugal pumps including selection criteria and pump laws.
Description : Supervises a team of technicians (various trades) and machinists in a gas plant workshop & in the outside field(plants). Familiar with all machine tools in a workshop, repair of rotating machinery components, heat exchangers repairs and re-tubing, valves reconditioning & refurbishment. Knowledgeable & skilled in balancing, welding, painting, tinsmith and civil crafts. A. Knowledge: Education: - Completion of secondary education(12 years) plus 2 years full time training in the mechanical discipline leading to possession of a recognized diploma. Experience: - Has working knowledge and maintenance experience(minimum 10 years) in the installation, maintenance and repairs of mechanical equipment in the maintenance department of gas plant, refinery or petrochemical plant. -Has a minimum of 15 to 20 years work experience in a workshop environment with hands on experience on all types of machinery. -Eight(8) years experience in a gas plat, refinery or petrochemical machine shop. -Minimum five(5) years experience in a supevisory position. B. Skills: -Computer Literate and use of a computerized maintenance management system(CMMS) -Fluent in english (Written, spoken) Competencies: -Ability to work under pressure day or night.
JEDI Middle East
Category : Engineering
Description : We are is still hiring TAB ENGINEER Qualification: 1. Fresh graduate is welcome 2. HVAC background is an advantage 3. Mechanical Engineer background is also an advantage 5. Preferably has visa and ID 4. Can commence to join immediately 5. Preferably base in Qatar and Kuwait. Note: 1. Interested applicant may send your updated CV
Description : Qatar Local Hiring ONLY
BIM Manager/Leader
Responsibilities
• Definition of technical and quality standards and tools for production and coordination of information models
• Preparation or support to prepare technical reports at project level, relevant to his field of play (discipline/trade)
• Development, maintenance and enforcement of Project BIM Requirements, by liaising with all stakeholders from Clients and its representatives
• Lead, maintain and coordinate with the company Project controls all required information tasks and activities for Contract, Project and Risk Management in accordance with company's standards
• Analysis and Review of technical information
• Review, Audit and Quality Check of Information models
• Task assignment and monitoring for the subordinates (production/project) team
Supervisory / Leadership / Managerial Tasks:
• Be an inspiration leader by strong principles and commitment to the organization based on organization, resilience and agility.
• Sponsor and disseminate an R&D and innovation culture across the department, defining a climate for overall success.
• Identify and establish new opportunities for BIM/Projects execution, in alignment with Line Managers and following company’s strategy
• Lead, maintain and monitor the task management systems for his subordinates, in collaboration with Project Controls
Requirements
Education: BSc, Project Management
Experience:
7+ Years
Description : Urgent Requirement For Marine Technician in Qatar(Apply Immediately)
Local Candidates only with transferable RP, experienced with Boats or Luxury Yachts, Experienced with Boat Navigation systems.
We prefer someone who can join immediately,
Must have 2 years of experience in Boats & Yachts.
Nationality: Any
Local Candidate, With NOC & QID
Must have transfer of sponsorship.
Best Salary & Accommodation And Transportation Company Provided
Recruitment Opportunity with Management Solutions International (MSI). Our client in Qatar is looking to hire ELV/LV Technician
Minimum Requirements:
• Candidate should be available locally in Qatar.
• Manlift Experience is required.
• Candidate Should have Driving License
Company : Mohajl Group
Country : Qatar
Description : Production Manager
We are hiring for the position of PRODUCTION MANAGER in our factory in Mesaieed.
Qualifications:
>Able to work under pressure.
>Transferable Residency permit with NOC.
Salary will be discussed during the interview..
Interested applicants may send updated resume
united-gulf
Country : Qatar
Description : A private company in Doha is looking for the following positions:-
1. OPERATIONS COORDINATOR
- with 2 to 3 years relevant experience in Heavy machinery industry.
- Graduate degree in similat field.
2. SPARE PARTS COORDINATOR
- with 2 to 3 years experience working in Stores.
- knowledge in handling spare parts for Heavy machineries like Aerial work platforms, Cranes, etc.
- knowledge/ experience in ERP, inventory control, documentation and supply chain.
- Graduate is mandatory.
As the Operations Manager you will be in charge of the day-to-day operations of the program by coordinating and supporting all operations variables in the delivery of the accelerator, driving engagement between the startups and the partners, and by continuing to build and strengthen the program’s position in the market. The Operations Manager overviews and supports in delivering, coordinating, and actively participates in: - Managing the operations of the program - Running the accelerator on a D2D business, including startup communications and creating a clear plan of delivery - Coordinating the recruitment for startups - Driving applications during the recruitment period - Coordinating relevant events, including Mentor days Angel bootcamps, FastTrack days, Selection days, Demo days - Assisting the Program Director in relation to investors and sponsors - Attracting and managing mentors - Preparing relevant reports (program reports, portfolio reports, etc) - Prepare expense reports for the team - Drive invoicing process and company registration related business - Managing the Entrepreneur in residence and the interns We’re looking for someone who ticks as many of the following boxes as possible: - You are organized, action and service-oriented; you are a self starter with focus on execution and speed - You have developed networking and communication skills - You have excellent business development skills and a high degree of commercial understanding and cultural sensitivity - You are a great match with our strong and value driven culture (see below) - You have 4-6 years of experience working with startups, growth companies and/or in the corporate world. Preferably a mix of both startup and corporate experience - You are an experienced program leader and have managed complex projects - You have experience running programs such as accelerators, corporate incubators, innovation programs or startup challenges - You have experience as a founder or early employee - You've interacted with founders, investors and with corporate executives What we offer: - A unique culture focusing on three strong values: being entrepreneurial, being impactful and being kind. Read our culture book herehttps://rainmaking.io/RM_culturebook.pdf - A great working environment and awesome colleagues - A fun and challenging role with lots of room to influence how things get done - An opportunity to work with some of the world’s best startups transforming the industry
Greetings From Swan Global
We have an immediate opening for HVAC Supervisor position!!!!
Should have 2-3 Yrs of in Supervising and maintenance experience.
Salary QR 4000(Full).
Must have QID . Any nationality.
Country : QATAR
Description : Greetings From SWAN Global...
we have an opening for HVAC Technician in Doha Location.
Required:
Should have experience in HVAC Technician(in facility management) .
3000 QAR+FAT, with valid QID.
Interested one can share the resume
Company : AHG
Country : Qatar
Description : ****IMMEDIATE HIRING****
FABRICATION MANAGER
Location: Al Khor
Minimum of 8 years experience in Structural and Steel Fabrication in GCC.
Should be able to manage the division independently.
Qualification: Engineering graduate with computer skills
With Transferable Visa and valid Qatar Driving License
Company : United Gulf Access
Country : Qatar
Description : HYDRAULIC MECHANIC
•Required to possess 4+ years’ experience as a mechanic with experience in access platforms (boomlift, scrissorlift, manlift, etc) or other heavy equipment
•Able to repair hydraulic systems & components independently.
•Should know how to troubleshoot read and understand hydraulic schematic diagram.
•Can independently overhaul / trouble shoot engines.
•Minimum Qualifications - Std 10th + ITI or equivalent certification.
•Salary: QAR 3,500.00 – QAR 4,500.00 per month
Company : Energy Electric Controls
Country : Qatar
Description : Must be at least minimum of 3 year(s) of experiences in Construction Industry mainly task is on Building Management System expert on SCHNEIDER ELECTRIC automation and devices.
Must be highly knowledgeable using SCHNEIDER STRUXUREWARE SBO software for 3 year(s) or more.
Must be a good team leader and player.
Can handle issues with minimum supervision.
Good character.
Other qualifications will be ask on interview.
Expect Actual programming of system on interview.
Responsible for operating the HVAC & Refrigeration plants and daily logging of all operating conditions.
• To perform periodical, preventive and breakdown maintenance of large HVAC and refrigeration plants.
• Knowledge in large seawater cooled chillers, trouble shooting on electrical and electronic controls of air-conditioning systems are desired.
• Responsible for all site coordination with company personnel
• Requesting and closing the work permit and to carry out the permitted jobs in line with the HSE requirements
• Coordinate with company warehouse for issue of materials.
• Ensure that all activities related to his discipline are performed safely and efficiently in line with company objectives.
DevOps Engineer for our Bahrain operations with the following skillsets & terms and conditions:
Responsibilities
• Work closely with members of the development, tests, and operations teams to troubleshoot build breaks, enforcement of software quality standards, and proper communication of the package’s installation steps to operations for both non-production and production environments.
• Continue development and maintenance of the automated software build process;
• Work closely with each product family to develop new DevSecOps features and capabilities;
• Assist with creating project resource estimates, metrics to track completion phase, defect reports, defect prevention, development efficiency and quality;
• Contribute to an atmosphere of cross-functional teamwork within the organization’s agile project lifecycle
• Develop and improve operational practices and procedures.
Requirements
Education / Certifications
College degree (B.S.) in Computer Science, Software Engineering, Information Management Systems or a related discipline
Knowledge & Experience
Qatar Airways
Welcome to a world where ambitions fly high
From experienced pilots to dynamic professionals embarking on new careers, Qatar Airways is searching for talented individuals to join our award-winning team.
We take pride in our people—a dynamic and culturally diverse workforce is essential to why we are one of the finest and fastest growing airlines in the world.
We offer competitive compensation and benefit packages.
About your job:
As a member of the Aircraft Deliveries & Supplier Quality Team, you are expected to oversee the build and quality assembly,including the delivery process of new required IFE system as per scope of company granted Authorizations a member of the Aircraft Deliveries & Supplier Quality Team. Establish partnerships with key suppliers to ensure the product is within the specification ensuring that all related deficiencies are noted and properly documented and corrected. Those deficiencies that cannot be corrected are imbedded in the associated commitment letter for improvement investigation and resolution as agreed while achieving cost containment.
Key Accountabilities include:
Operational
To supervise a team of technical assistants which would be responsible for the final release of IFE products by the Supplier Quality Engineer - Level I (IFE).
Perform all new supplier products' Source Inspections (SI) related to In-Flight Entertainment systems prior delivery to Qatar Airways or designated MRO's to make sure the products is as per the specification and free of any quality manufacturing defects.
Initiate action to prevent the occurrence of any non-conformities relating to product quality and verify the implementation of the solution.
Work with Vendor & Contract performance section to monitor the supplier KPl's and to ensure supplier performance is regularly reported and that appropriate and timely corrective actions are implemented.
Participate in the establishment of In-Flight Entertainment system supplier performance metrics.
Identify program related issues of In-Flight Entertainment and cabin systems' and liaise technical concerns to respective Qatar Airways department in order to place a solution on a timely manner
All manufacturer's published technical documents relating to open supplier concerns are reviewed and validated during factory inspection of supplier product ensuring items that affect the fleet operation are highlighted to responsible Aircraft Deliveries section for contractual resolution
Company : Alba Generators WLL
Country : Qatar
Description : We are looking for:
1 Mechanic
1 Electrician
Who can join us immediately (Urgent Hire)
One (1) Year Experience of Diesel Generators
Salary to be discussed during Interview
Company : Venture Gulf Engineering
Country : QATAR DOHA
Description : Structural Fabricators
Riggers - 3rd party certified
NDT Technicians
Electricians - Industrial
Electrician cum AC Technicians
Diesel Forklift Operators - Licensed
Heavy/Trailer Drivers - Licensed
General Workers
Certified 6G Welders, TIG+ARC
Certified Steel Fabricators
Working with CNC Milling machinery from 3axis to 5axis
QUALIFICATIONS
• Mold tooling design and Core a cavity design by CATIA software
• Sketch design and Part design by CATIA
• Generative shape design and Assembly design by CATIA
• Drafting by CATIA
• Prismatic machining and Surface machining by CATIA
• Lathe machining by CATIA
• Working with Turning and Milling machinery on manual
• Working with CNC Turning and Milling machinery as an operator
• Servicing and maintenance of CNC machinery on manual
• Working with variety of pillar and radial drills
• 3D models design and 2D industrial Cartography by CATIA
[۷/۵،†۱۸:۳۸] Omid Reza: • Production process design to produce industrial components by CNC
Turning Milling on manual
• Being familiar and working with CNC controls
• Being able to get G-code to produce industrial components by CNC
machinery
• Operational and practical familiarity in using measurement tools such as
variety of Calipers, depth gauge, inside and face micrometers and
diameter testers
• Being familiar with Siemens, Fanuk, Heiden Hain and Engelhard
controls.
• Being familiar with some software such as Solid Works, Power Mill and
Master Cam and the ability to use them in building and designing
industrial components
• Designing mechanical parts of Electron Beam Welding and building
components of the project
• Programming CNC Turning-milling by CATIA
CURRENT OCCUPATION
• Producing industrial components related to Petrochemicals, Oil,
Automobile Manufacturing industries in my own private workshop
• Designing and building industrial components wither in isolation or by
assembly
RELATED EXPERIENCES
2005-current
• Learning to work with CATIA software
• Learning to program CNC machinery, an advanced technology, after
their emergence in private sector in Iran
• Teaching design and modeling 3D and industrial cartography by
CATIA
• Working with the learned controls
• Designing and building hydraulic increasing and decreasing valves
from 30 bar to 690 bar and vice versa
• Conducting researches on industrial issues
[۷/۵،†۱۸:۴۰] Omid Reza: • Reverse Engineering and producing hydraulic regulators having 30-
690 bar pressure and hydraulic manual pumps up to 700 bar (for which
maps and 3D models will be sent as an appendix to this CV)
• Applying such materials as Stainless Steel-316, Steel-304, Steel-310
and Steel-321 and 1.2344, 1.2312, VCN200 and VCN150 Steels and
Umithite and a variety of Aluminum Grades, including 2000, 6000 and
7000 groups in building components
Instrument Technician with testing and commissioning experience. Requirements QID with NOC / Working visa with NOC Able to join immediately
Company : Venture Gulf Engineering
Country : QATAR DOHA
Description : ELECTRICAL ROTATING MACHINERY REPAIR SHOP JD FOR SUPERVISOR
Position : Workshop supervisor
Department : ERMRS
Job duration : 2 years extendable
No. of vacancies : 1
Job Summary
Knowledge about A/C & D/C motor and generator rewinding and repair. co-ordinate and
prioritize all the works performed in the shop department and ensure that every repair stage
meet the standards and satisfy client’s requirement.
Job Responsibilities
 To schedule and prioritize all works to be performed by the respective sections.
 To monitor, initiate and implement the use of documentation for each respective process in
every section.
 To analyze and investigate quality control problems and customer complaints.
 To study and recommend solutions for quality improvements to achieve the quality
objectives.
 To develop, improve and maintain the documentation of every job.
 To assist the technicians in analyzing defects and inspection of each components prior to
finalize the recommended scope of work.
 To assist technician in decision pertaining to dismantling, assembling and testing of electromechanical equipment.
 To review and ensure that all pertinent data’s and sketch written on the data sheets are
correct, legible and understandable with the other personnel.
 To conduct testing, inspection and analysis of raw materials, components and repaired
equipment to ensure of its quality, performance and correctness.
 To review and make a summary list of needed parts for each job orders and raise purchase
request to stores.
 To review, inspect and check the purchased materials or components for its correctness,
quality and suitability.
 To confer to the workshop manager for any discrepancy or non-conforming products found
Page 2 of 2
during the repair or testing process.
 To ensure that all finished works meets our standard quality criteria, client’s requirement
and all paper works are complete.
 To comply with all company memos and if required distribute appropriately to shop
personnel.
 To assist / supervised employees understand and observe company rules and regulations
including proper safety procedures.
 To perform other skilled or non-skilled duties as directed by the workshop manager.
 To observe all safety procedures and use of proper protective gears.
Remuneration package : QAR 4000 – 5000 Basic Salary
Employee benefits : 21 days annual leave with leave salary
Joining passage from home town to Doha
Yearly passage from Doha-home town-Doha
Single status bachelor staff accommodation
Food allowance of QAR 300 per month
Company : Mace macro international limited Qatar
Country : Qatar
Description : fire alarm system&Vesda System installed & maintenance inspection, testing. fire fighting system maintenance Inspection testing quarterly annually & fire extinguisher maintenance fm200 system maintenance. inspection, testing. hospitality & project's
ORYX Engineering-------
DUTIES AND RESPONSIBILITIES
Assist in the planning, organisation and implementation of a planned preventative maintenance programme.
Inspection, installation, levelling and alignment of all new plant and equipment.
Perform unscheduled, preventative and predictive maintenance on complex equipment and systems.
Trouble shoot, maintain, repair or replace pneumatic, hydraulic, electrical and mechanical equipment.
Trouble shoot, maintain, repair or replace inverters, spindle drives, drive motors, clutches and bearings.
Trouble shoot, maintain and repair CNC controls, and PLC Systems.
Reassemble and test in accordance with all approved OEM / OES work and test procedures.
Ensure that all work activities are carried out in an efficient, professional and tidy manner.
Regular progress updates and report any new findings or issues that may impact on completion date.
Maintain a high standard of personnel / workshop / equipment / machines and tooling cleanliness.
Accurately record repairs, time, parts and materials in the computerised maintenance management system.
Comply with all company QHSE policies, practices and procedures.
Contribute to the team ethic and perform other reasonable duties as required in support of the business.
Maybe required to work off site in support of business activities.
SKILLS AND QUALIFICATIONS
Time served in a electrical/mechanical engineering discipline ideally with forklift certification. Must have a minimum of 4 years experience in electrical, mechanical, hydraulic and pneumatic systems root cause analysis diagnostics and repair, tool testing, PLC trouble shooting, programming, variable speed spindle/servo drives and other plant and equipment.
Carrier
Order Intake: Work towards achieving the assigned order intake target in the respective categories of Service Agreements, Service Repairs and Service Modernisation, while complying with company Finance, Ethics and Sales Policies. Sales: Work towards achieving the assigned sales target in the respective categories of Service Agreements, Service Repairs and Service Modernisation, with aggressive internal and external customer follow-up. Gross Margin: Work towards achieving the assigned Gross Margin target in the respective categories of Service Agreements, Service Repairs and Service Modernisation by extensive customer negotiation and winning projects at the right price. Receivables: Be personally responsible for the pending receivables from customer and ensure that all outstanding balances are cleared in timely manner. Qualifications: • Bachelor’s degree in mechanical engineering or equivalent. • 3-5 years of experience in HVAC service sales. • Knowledge of HVAC industry in Qatar • Qatar Driving license • Good command of written and spoken English, Arabic is a plus. What do we offer? • Benefit from our great workplace environment and culture • Participate in incentive plans • Get development and learning opportunities • Get competitive salary and benefits, suitable to your seniority level Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.